9 releases

1. v2026.5.2 # 1 month ago · 2026-05-27 15:22 UTC

   View release ↗

   Based on MeshCore v1.15.0 main@ecd0cfc1c133aad93e65257f002151591f6bcfd9

   Features

   • Add support for the Seeed P1 Pro bridge type
   • Restrict the “01” advert reduction to repeaters only
2. v2026.5.1 # 1 month ago · 2026-05-22 16:26 UTC

   View release ↗

   [v2026.5.1] - 22/05/2026

   Based on MeshCore v1.15.0 main@ecd0cfc1c133aad93e65257f002151591f6bcfd9

   Features

   • Update versioning scheme to year.month.release format (e.g. 2026.5.1)
   • Include Lora longer preamble #1954 to improve 868MHz performance in Portugal
   • Reduce advert rate from 3 to 1 within the permitted broadcast window
   • Prevent advert from mobile repeaters identified with (01)

   Full Changelog: https://github.com/Meshcore-Portugal/lusofw/compare/v0.0.7...v2026.5.1

3. v0.0.7 # Pre-release 3 months ago · 2026-04-01 14:51 UTC

   View release ↗

   Changelog

   [v0.0.7] - 01/04/2026

   Based on MeshCore v1.14.1 main@467959cc3bfc884e5f3425caac89453a450151b6

   Features

   • Increase default airtime factor to 9.0 (targets ~10% duty cycle)
   • Set default flood_advert_interval to 24 hours (instead of disabled)
   • Only schedule flood advert timers when flood_advert_interval is greater than 0
   • Add version-aware defaults migration with persisted firmware version tracking
   • Apply only defaults newer than the stored version during migration
   • radio.lna renamed to radio.rxgain, use with get and set
   • Add rs232 support for Xiao NRF52 (serial1, rx(7), tx(6))

   Full Changelog: https://github.com/Meshcore-Portugal/lusofw/compare/v0.0.6...v0.0.7

4. v0.0.6 # Pre-release 4 months ago · 2026-03-06 13:49 UTC

   View release ↗

   Changelog

   [v0.0.6] - 06/03/2026

   Based on MeshCore v1.14.0 dev@3fe2dd7f48733fe77da7549cd24ef28bf07e1e5a

   Features

   • Disable advert interval by default (was 2 minutes)
   • Disable flood advert interval by default (was 12 hours)
   • Enable listen before talk with interference threshold of 14
   • Refactor buildAdvertData to use prefs when no GPS support is enabled
   • Set default loop detection preference to minimal sensitivity
   • Add 0x01 to reserved identity hash prefixes

   ---

   Full Changelog: https://github.com/Meshcore-Portugal/lusofw/compare/v0.0.5...v0.0.6

5. v0.0.5 # Pre-release 4 months ago · 2026-03-04 20:03 UTC

   View release ↗

   Full Changelog: https://github.com/Meshcore-Portugal/lusofw/compare/v0.0.4...v0.0.5

6. v0.0.4 # Pre-release 4 months ago · 2026-02-23 12:30 UTC

   View release ↗

   Full Changelog: https://github.com/Meshcore-Portugal/lusofw/compare/v0.0.3...v0.0.4

7. v0.0.3 # Pre-release 4 months ago · 2026-02-21 12:12 UTC

   View release ↗

   Full Changelog: https://github.com/Meshcore-Portugal/lusofw/compare/v0.0.2...v0.0.3

8. v0.0.2 # Pre-release 4 months ago · 2026-02-20 17:26 UTC

   View release ↗

   Full Changelog: https://github.com/Meshcore-Portugal/lusofw/compare/v0.0.1...v0.0.2

9. v0.0.1 # Pre-release 4 months ago · 2026-02-18 11:24 UTC

   View release ↗

   Full Changelog: https://github.com/Meshcore-Portugal/lusofw/commits/v0.0.1